Home / Insights

Warehouse layout series · Part 3 of 5

Wide, Narrow or Very Narrow Aisles? Warehouse Density Against Access

Contents
  1. Three aisle widths, three trucks
  2. The same building, three ways
  3. The Layout Lab
  4. What the simulation shows
  5. What the extra positions cost
  6. What the shift does not show
  7. How to check your own building
  8. What the model leaves out
  9. Key points
  10. Sources

Part 2 found that, laid out well, the U-shape, straight-through and L-shape pick at almost the same cost. This part keeps the U-shape and asks the next question every growing warehouse meets: when the racks are full, do you narrow the aisles to fit more pallets in, or lease more space?

Narrower aisles mean more pallet positions in the same building, but a different truck, more cost up front and less room for the people working in the aisles. The trade-off is density against access. This part runs three aisle widths through the same shift and prices the extra positions against Metro Vancouver rents.

Three aisle widths, three trucks

The aisle width is set by the truck that has to turn or work in it. Aisles for a standard counterbalance truck are usually about 12 ft (3.7 m); reach trucks and other narrow-aisle trucks work in about 9 to 10 ft (2.7 to 3 m); very-narrow-aisle (VNA) trucks fit aisles of about 6 ft (1.8 m) or less.

Table 1. The three set-ups

Set-upAisleTruckHow it stores a palletWhat else it needs
Wide aisles4 mCounterbalance truckDrives in, turns 90 degrees to face the rack, liftsNothing special; the same truck can also load trailers
Narrow aisles3 mReach truckTurns in the aisle in less room, reaches the forks outA trained operator; it is not built for trailers
Very narrow aisles2 mWire-guided turret truckDrives straight down the aisle and swivels its forks to either side; never turns in the aisleA superflat floor in the aisles, a guide wire or rail, VNA-tolerance racking, and rules that keep people out of an aisle while the truck is in it. A man-down turret truck can also fetch pallets from staging, but loses time each trip leaving and rejoining the guide wire

The same building, three ways

All three use the Part 2 U-shape: the same 72 by 52 m building, three receiving and two shipping doors, staging, packing, crew, 300 orders and 14 inbound trucks. The racks run across the building with front and back cross-aisles, and the busiest SKUs sit nearest packing. Only the aisle width changes, and with it the number of rack rows:

  • Wide aisles (4 m): 11 aisles, 660 pick faces. That is fewer than the 780 SKUs, so the 120 slowest SKUs share a face, two to a pallet position.
  • Narrow aisles (3 m): the Part 1 and 2 layout. 14 aisles, 840 pick faces: one per SKU with some to spare.
  • Very narrow aisles (2 m): 17 aisles, 1,020 pick faces. The turret truck and pickers never share an aisle: whoever arrives second waits at the aisle end.

All three keep the same clear height: a floor position and three beam levels. In a taller building VNA gains more, because turret trucks lift higher than counterbalance trucks.

01,0002,0003,0004,000Pallet positions (floor plus three beam levels)Wide aisles (4 m)2,640Narrow aisles (3 m)3,360Very narrow aisles (2 m)4,080
Figure 1. Pallet positions in the same building. Each step down in aisle width adds about 720 positions.

The Layout Lab

The simulator runs the three set-ups through the same shift. Pick All three to compare them or one set-up to see it larger, and switch between the 2D plan and the 3D view. In the very narrow aisles, watch for amber rings at the aisle ends where pickers and the turret truck wait for each other.

Figure 2. The Warehouse Layout Lab with three aisle widths. The animation replays the shift 12 times faster than life; the table is the whole simulated shift.

Open the Layout Lab on its own page for a larger view.

What the simulation shows

Table 2. One shift at 300 orders a day

MeasureWide aislesNarrow aislesVery narrow aisles
Pallet positions2,6403,3604,080
Pick faces for 780 SKUs6608401,020
Walk per order74 m70 m64 m
Picker-hours a day18.017.717.5
Picker time giving way or waiting at an aisle end1 min1 min21 min
Truck time per pallet put away2.39 min2.15 min2.35 min
Truck time waiting in the shift0.1 min0.0 min9.4 min
Dock-to-stock time (average)50 min33 min47 min
  • Picking barely changes. The busy SKUs sit near packing in all three, so pickers need 18.0, 17.7 and 17.5 hours a day. Across ten other simulated days the order never changed, and wide aisles were never more than 0.85 picker-hours a day behind very narrow aisles. At this volume more faces even help a little: more of the busy SKUs fit in the front bays. From 400 orders a day, with more pickers waiting at aisle ends, very narrow aisles fall behind narrow aisles. In wide aisles the shared faces push the slowest SKUs to the back, which costs little because they are rarely picked.
  • Narrow aisles put away fastest. The reach truck needs 2.15 minutes a pallet. The counterbalance truck needs 2.39: it has to turn in the aisle to face the rack. Dock-to-stock is 33 minutes against 50.
  • Very narrow aisles cost time at the aisle ends. The turret truck is set to store a pallet 10 seconds faster than a reach truck, but each trip off the guide wire to staging costs time, and it cannot enter an aisle with a picker in it. It needs 2.35 minutes a pallet and waits 9.4 minutes in the shift. Pickers wait 21 minutes in total, against about 1 in the other set-ups.
0510152025303540150225300375450525600Orders a dayTruck minutes waiting a shiftWide aislesNarrow aislesVery narrow aisles
Figure 3. Minutes the pallet truck waits in a shift as volume grows. In very narrow aisles people and the turret truck take turns, and the waiting grows with the traffic.

The waiting grows with volume. At 400 orders a day, with more pickers in the aisles, the turret truck waits 15.5 minutes a shift; at 600, 39.7 minutes, while the other two stay under a minute, and pickers lose 85 minutes in total waiting to get into an aisle. The more people pick from the ground level of VNA aisles, the more they and the truck get in each other's way, which is why many VNA sites keep their fast movers in a separate wide-aisle pick zone.

What the extra positions cost

The published price ranges below are in US dollars and converted at 1.42 Canadian dollars per US dollar (mid-November 2026). Treat them as a first screen, not a quote.

Table 3. Published price ranges used

ItemPublished rangeSource
Selective pallet racking, newUS$50 to US$120 a pallet positionBastian Solutions and TranSystems' rules of thumb quoted by Modern Materials Handling ($50 to $75); a 2026 buyer's guide ($50 to $120)
VNA racking (tighter tolerances), for every positionUS$80 to US$200 a pallet positionSupplier price guide
Counterbalance truck, newUS$15,000 to US$50,000Municibid pricing guide
Reach truck, newUS$25,000 to US$60,000Municibid pricing guide
Turret truck, newUS$100,000 to US$200,000Our estimate, not a published price: Modern Materials Handling says narrow-aisle trucks cost up to twice a counterbalance truck and advanced turret trucks double that again. Get quotes
Superflat floor in VNA aislesUS$1.50 to US$8 a sq ft (2003), used here as US$2.62 to US$14.00 in today's moneyPublished 2003 figures for grinding (lowest) to replacing the floor (highest), raised by 75%; get a floor survey and quote
Industrial rent, Metro VancouverC$18.87 net plus about C$7.12 additional rent a sq ft a yearCBRE Q3 2026 net asking rate; Avison Young additional rent

To compare like with like, the extra positions are priced against leasing the same storage elsewhere. The wide-aisle rack zone holds one pallet position for every 8.6 sq ft. At C$25.99 a sq ft a year, one leased position costs

\[R = a \times r = 8.56\ \text{sq ft} \times \$25.99 \approx \$223\ \text{a position a year}\]

where \(a\) is the floor area per position and \(r\) the gross rent. That counts the rack floor only, with no second dock, staff or shuttle trucks, so it understates the real cost of a second building. The payback is then

\[\text{Payback} = \frac{\text{One-off cost}}{n \times R + \Delta L}\]

where \(n\) is the number of added positions and \(\Delta L\) the labour saved a year against wide aisles (picking plus put-away time at $40 an hour, 250 days a year). For narrow aisles the existing racks are reused; taking them down and re-erecting them is our assumption at 25% to 40% of their new price. For very narrow aisles all racking is new, to VNA tolerances. The payback is at 300 orders a day with one truck; from 400 orders every set-up needs a second truck, and for very narrow aisles that second truck is another turret truck at $142,000 to $284,000, not counted here.

Table 4. Moving from wide aisles to narrow or very narrow aisles (Canadian dollars)

ItemNarrow aislesVery narrow aisles
Added pallet positions7201,440
New racking (narrow: added positions only; very narrow: every position)$51,000 to $123,000$463,000 to $1,159,000
Taking down and re-erecting the existing racks$47,000 to $180,000None
Truck$36,000 to $85,000$142,000 to $284,000
Superflat floor in the rack zone (guide wire not included)None$84,000 to $449,000
Total one-off cost$133,000 to $388,000$690,000 to $1,892,000
Cost per added position$185 to $539$479 to $1,314
Space you would otherwise lease6,165 sq ft12,330 sq ft
Rent avoided a year$160,000$320,000
Picking and truck time saved a year against wide aisles$11,000$6,000
Payback0.8 to 2.3 years2.1 to 5.8 years
0123456Years to pay back, against leasing the same positionsNarrow aisles0.8 to 2.3 yearsVery narrow aisles2.1 to 5.8 years
Figure 4. Payback against leasing the same number of pallet positions, from the low and high ends of the published prices.
  • Narrow aisles are the cheaper step. 720 more positions for $185 to $539 each, paid back in 0.8 to 2.3 years against leasing about 6,165 sq ft.
  • Very narrow aisles add twice the positions at a higher price each. 1,440 more positions at $479 to $1,314 each, because every position needs new VNA racking, and the turret truck and the floor come on top. Payback is 2.1 to 5.8 years.
  • The time saving is small. About $11,000 and $6,000 a year: the case for narrower aisles is the space, not the speed. Those are minutes of people already paid for the shift, so treat them as capacity rather than cash.
  • The payback is real only if you need the positions. Rent avoided is the whole saving. If the racks are not full most of the year, or slotting and clearing dead stock would free enough space (see cube utilization and slotting), narrower aisles buy capacity you pay for and do not use.

What the shift does not show

  • One truck per aisle. VNA trucks are made for one aisle width; if the only turret truck is down, nothing else can work those aisles.
  • Operators. Reach and turret trucks need more training, and experienced VNA operators are harder to find and keep.
  • Safety rules. VNA sites keep pedestrians out of an aisle while the truck works in it, usually with gates, sensors or a permit system. Narrow aisles shared by people and reach trucks need clear give-way rules.
  • Racks in Vancouver. Seismic design and anchoring raise rack costs above the published averages, and moving racks needs an engineer's sign-off.
  • Fire and sprinklers. More pallets and narrower flue spaces can change sprinkler requirements; check with your fire protection engineer before narrowing aisles.
  • Lease terms. Leasing more space is flexible; a VNA floor and guide wire stay with the building.

Table 5. Choosing an aisle width (rules of thumb; the simulation informs the second and third rows)

If this is trueStart with
The racks are not full most of the yearKeep the aisles; fix slotting and dead stock first
You need up to about a quarter more positions and pick from the racksNarrow aisles with reach trucks
You need the most positions, with few people picking from the same aislesVery narrow aisles, with fast movers in a separate wide-aisle pick zone
The building is tall (over about 9 m clear) and the floor is new or goodVNA gains more; ask for a floor flatness survey
You expect to move within a few yearsLease space or narrow the aisles, rather than invest in a VNA floor

How to check your own building

  1. Measure how full the racks are, month by month for a year. Narrower aisles pay only for positions you would otherwise rent.
  2. Count the positions each width gives you, on a scale plan of your own building, with the clear height and the columns.
  3. Price the space you would lease instead, including additional rent, shuttling between buildings and a second set of staff.
  4. Get quotes, for racks (with seismic design), trucks, and, for VNA, a floor survey.
  5. Count the people in the aisles. If many picks are from the ground level of the racks, plan where pickers will work while the turret truck is in an aisle.

What the model leaves out

  • One shift with one fixed seed per day, single-order case picking, one pallet truck (two from 400 orders a day).
  • The same building height for all three; truck lift heights and speeds at height are not modelled.
  • Truck differences are fixed times, not results: the counterbalance truck takes 15 seconds longer to store a pallet, the turret truck 10 seconds less, plus 20 seconds a trip to leave and rejoin the guide wire.
  • At 350 orders a day, just below the switch to two trucks, all three set-ups leave some inbound pallets not put away by 15:00.
  • No replenishment of pick faces, no returns, no breakdowns.
  • Prices are published ranges in US dollars at one exchange rate, with no resale value for the old truck and no financing cost.

Key points

  • In this building, 3 m aisles hold 720 more pallet positions than 4 m aisles, and 2 m aisles 1,440 more.
  • Picking cost hardly depends on aisle width when the fast movers are near packing. Very narrow aisles add waiting at the aisle ends, which grows with volume.
  • Against Metro Vancouver rents, narrow aisles paid back in about 0.8 to 2.3 years and very narrow aisles in about 2.1 to 5.8 years, but only if the extra positions would otherwise be leased.
  • Check how full the racks really are before you pay for density.

Earlier in this series: Part 1, what a bad layout costs, and Part 2, choosing a flow pattern. Next: Part 4, feeding the production line. Related: cube utilization and slotting and the dock door bottleneck in the warehouse operations series.

Sources

The distributor, its three set-ups, orders and times are an illustrative example built from stated assumptions, and the simulator is a simplified model. The prices are published ranges, not quotes: racks, trucks and floor work in your building, with Vancouver seismic requirements, need quotes from suppliers. This is not financial advice.

Keep reading

Related articles

All 186 articles

Ready to find your next improvement?

Book a strategy call. We will talk through your goals, pain points and where AI, systems or process work can make the biggest difference.